BBS Wheel Stickers – Black ( Set of 4)

The BBS Wheel Stickers is a wheel stickers supplied by Torquepartz, the Essex-based BBS and European tuning specialist. BBS Sticker x 4 pieces6cm x 2cm. Black8cm larger sticker also available to match. Fixes to wheel rim. BBS wheels are an icon of motorsport and aftermarket tuning, but they are only as good as the small parts that hold them together. Our BBS Parts range covers every fastener, badge, cap and centre that you need to refresh, rebuild or repair a set of BBS split rims, RS, RM, CH-R or E88 wheels. We stock original-style replacement parts and the small upgrades — gold hardware, blue centres, motorsport hex nuts — that have made us the BBS specialist of choice for UK owners for over a decade.

• Original BBS specification, not a generic pattern part • Suitable for BBS RS, RM, CH-R and E88 split rim wheels • Manufactured to OEM tolerance for fit and finish • Supplied as a single part unless otherwise stated in the title

We cross-check every part in our range against the original specification, so the part you receive will fit exactly as the original did. BBS RS, RM, CH-R, E88 and Motorsport centres all share common sizing across the range, but each part is cross-referenced to a specific wheel model. We list the fitment in the title and the long description; if you are not sure, send us a photograph of the back of the existing part and we will identify it for you. If you are not sure whether this part fits your car, send us a message before you order. We reply to every question, usually within an hour during UK business hours, and we will not despatch a part until you are sure it is the right one.

Most BBS parts (centres, caps, badges, valves) are hand-fit and do not need any specialist tool. Centre nuts torque to between 6 and 8 Nm — never use an impact driver on a BBS centre nut, as it can crack the plastic. If you are unsure, our team can talk you through the job on the phone. Tools required: typically none. Some BBS centres require a small plastic trim tool to remove the old centre without marking the wheel. If you are not confident fitting the part yourself, any good independent garage can fit it in under an hour.

BBS is the most recognised name in aftermarket wheels, and the most demanding to maintain. We have been working on BBS split rims and motorsport centres for over a decade, and we know which bolts fit which wheels, which centres suit which bore, and which valves match which rim. Every BBS part we sell has been cross-checked against the original specification.

BBS and split rim owners tend to know exactly what they are looking for, and they tend to be unforgiving of parts that do not fit. We supply the parts that we would fit to our own wheels, and we cross-check every order before despatch. If the part you order does not fit, we will exchange it or refund it — no quibble. Every part we sell is covered by our standard returns policy. If the part is not right for your car, send it back within 14 days for a full refund. We also offer a no-quibble exchange if you order the wrong part by mistake — we have all done it. UK orders are dispatched the same day if ordered before 2pm, with free UK shipping on orders over £150. International orders are dispatched the next working day with tracked shipping. We hold stock of the parts shown as in stock; out-of-stock parts are clearly marked.

Small parts like this are packed in a padded envelope or a small cardboard box, depending on the size and shape. We always over-pack small parts to make sure they arrive in perfect condition, and we have a very low damage rate because of it. UK orders are dispatched the same day if ordered before 2pm, with free UK shipping on orders over £150. International orders are dispatched the next working day with tracked shipping. We will email you the tracking number as soon as the part is on its way. If the part is not right for your car, send it back within 14 days for a full refund. The part must be in its original packaging and in unused condition. See our returns page for the full policy.

Q: Will this BBS Wheel Stickers fit my car? A: Fitment is listed in the title and the long description. If you are not sure whether this part fits your specific car, send us a message before you order with a photograph of the existing part and your vehicle registration. We reply to every question, usually within an hour during UK business hours, and we will not despatch the part until you are sure it is the right one. Q: Is this an original part? A: This is an OEM-style part manufactured to the same specification as the original. We sell OEM-style parts because the originals are often unavailable or significantly more expensive. Q: How quickly will my order be dispatched? A: UK orders are dispatched the same day if ordered before 2pm, with free UK shipping on orders over £150. International orders are dispatched the next working day with tracked shipping. We will email you the tracking number as soon as the part is on its way. Q: What is your returns policy? A: If the part is not right for your car, send it back within 14 days for a full refund. The part must be in its original packaging and in unused condition. See our returns page for the full policy. We also offer a no-quibble exchange if you order the wrong part by mistake. Q: Do I need any special tools to fit this part? A: Most BBS and split rim parts are hand-fit with no special tools required. For bolts and nuts, you will need a calibrated torque wrench. Do not use an impact driver on a BBS centre nut or a split rim bolt, as it can crack the wheel or the fastener. Torque to the original specification, in a star pattern, and retorque after 50 miles. Q: Can I fit this part myself or do I need a garage? A: Centres, caps, badges and valves can be fitted by hand in seconds. Bolts and nuts require a calibrated torque wrench, which most home mechanics already own. If you are not confident, any good independent garage can fit the part in under an hour. We do not recommend using an impact driver on any BBS or split rim fastener. Q: Can I collect my order from your workshop? A: Yes, you can collect from our workshop in Ilford, Essex by appointment. Select "Local collection" at checkout and we will email you to arrange a time. Collection is free, and you can pay online or on collection. Our address is Finance House, Eastern Avenue, Ilford, Essex, IG2 6LR.

Wheel hardware should be inspected at every tyre change. Check the bolts, nuts, washers and valves for signs of corrosion, thread damage or fatigue. Replace any fastener that shows signs of wear. BBS centres and badges should be cleaned with a soft, non-abrasive cloth and a mild detergent. Do not use solvent-based cleaners, brass cleaners or abrasive polishes on the centre cap, as they will damage the lacquer and the badge. Stainless steel bolts and nuts can be cleaned with a mild stainless steel polish to remove surface contamination. Gold and black finishes should be cleaned with warm soapy water and a soft cloth only. Split rim valves should be replaced at every tyre change. The rubber deteriorates with age and exposure to brake cleaner, tyre shine and ozone, and a perished valve is the most common cause of a slow puncture on a split rim wheel.

The thread, length and head type for this BBS Wheel Stickers are listed in the title and the technical specifications above. We cross-check the dimensions against the original BBS specification before listing the part, and we reject any batch that does not match. If you are replacing an existing fastener, measure the old bolt across the head, along the shank, and across the thread before ordering. The most common mistake is to order a bolt that looks the right size but is 2-3mm longer or shorter than the original. The wrong length will either not seat fully or bottom out in the blind hole, both of which will cause a failure. For BBS centres, measure the bore of the centre (the hole in the middle of the wheel). The standard BBS RS bore is 60mm, but some aftermarket and motorsport centres have a different bore. If the centre is too small, it will not clip in; if it is too large, it will not stay clipped in. If you are not sure, send us a photograph of the back of the existing centre with a ruler next to it. For BBS split rim valves, the standard length is 11.5mm, but shorter 8.3mm valves are used on some wheels. Measure the height of the existing valve from the base to the top of the rubber. If you are not sure, send us a photograph and we will identify it for you. If you are not sure whether a part is the right size for your car, send us a photograph with a ruler next to it and we will identify the correct part for you.

Torquepartz was founded in 2014 by a small team of BBS and European tuning enthusiasts from our workshop in Ilford, Essex. We started as a BBS specialist, restoring and refurbishing split rims and supplying the small parts that hold them together. Over the last decade we have grown into a broader European tuning specialist, but we have kept the same standards: every part we sell is selected because it meets the standard we set for our own cars. Our team is small, and we reply to every email and every phone call. We do not have a call centre, an overseas support team, or a chatbot. If you send us a question, you will get an answer from someone who knows the part and knows the cars. We have fitted the same parts we sell to our own cars, and we have made every mistake there is to make with BBS, split rims, badges and lights. We will not let you make the same mistakes. We hold stock of the parts that UK and European owners actually buy. Every part has been cross-checked against the original specification before it goes in the catalogue, and every order is checked again before it goes in the post. We have a very low damage rate and a very low return rate, because we take the time to do it right. We are active in the European tuning community in the UK and Europe. We sponsor a small number of cars at shows and we attend the major European tuning meets every year. If you see us at a show, come and say hello. If you are not sure whether a part is right for your car, send us a message. We reply to every question, usually within an hour during UK business hours, and we will not despatch a part until you are sure it is the right one. We also have a 14-day no-quibble returns policy, so if the part does not fit, you can send it back for a full refund. Thank you for reading this page. We know it is long. We hope it has answered the questions you had about this BBS Wheel Stickers, and given you the confidence to order. If you have any more questions, send us a message — we are always happy to help.

Buyers searching for this bbs parts part often use terms like BBS Wheel Stickers or related part numbers. If you arrived here from one of those searches, you are in the right place: this is the part, it fits, and it is in stock. You may also be searching for: BBS RS hex nuts, BBS RM centre caps, BBS CH-R badges, BBS split rim valves, BBS gold bolts, BBS motorsport centres, BBS RS001 centres. We hold stock of all of these, and our team can cross-reference a part number to the correct part if you are not sure which one you need. If you cannot find the part you are looking for on our site, send us a message. We reply to every question, usually within an hour during UK business hours, and we can usually source the part from our supplier network within a few days.

Below is a curated list of related pages on our site, including the full BBS Parts range, related categories, and our shipping and returns policies. Each link opens in a new tab if you middle-click or cmd-click.

Order before 2pm for same-day UK dispatch. Free UK shipping on orders over £150. International tracked shipping available at checkout. If you have any questions about this BBS Wheel Stickers, send us a message — we reply to every question, usually within an hour during UK business hours.